Common Applications of Brass Hose Barb Fittings

Brass Hose Barb Fittings are used to attach different types of hoses. They are designed for easy installation. You can choose the fitting based on the size and the amount of blow off resistance.A good match between hose tubing and the barb will provide better seal and resistance to blow-off. A mismatch will result in leakage and can cause maintenance problems.

The best way to pick a hose barb fitting is to test the samples under real operating conditions. In addition, the manufacturing process can leave parting lines on the barb edge.When you are installing a hose, lubricate the inside of the hose before you insert it into the fitting. This will allow the tubing to relax in the gripping edge of the barb and create a seal. It is also important to ensure that the hose is elastic.

Another factor to consider is the durometer of the hose. If it is too soft, the barb edge will cut into the hose. If it is too hard, the barb will not be able to grip the tubing and may not seal properly.One of the most common reasons for fitting failure is a mismatch between the durometer of the hose and the barb design. For example, a hose made of vinyl is considered to be soft, while a hose made of rubber is considered hard.Barbed hose connectors are primarily used in low pressure applications. These include chemical processing industries and food and beverage industries. Choosing the right barbed connectors is the key to a cost-effective system design.